top of page

LEXAN™ THERMOCLEAR™ PLUS SCIR 10 mm 5 Wall Rectangular Polycarbonate

Lexan Sheet Details

Coated UV Resistant & Reduced Heat. Lightweight@1.75 kg/m² Multi-Wall Sheet

LEXAN™ THERMOCLEAR™ SCIR ( Solar Control Infra-Red) 10 mm is a 5 Wall Polycarbonate Multi-Wall Sheet.

It is Lightweight at 1.75 kg/m² & has an Advanced Solar Control Infra Red Blocking Material Technology that Blocks More than 30% IR thus Reducing Low Solar Transmission.
Furthermore, The Material Technology will Assist in delaying the Heat Build Up Inside the Room or Building

LEXAN™ THERMOCLEAR™ SCIR 2UVIR105R175 5 Wall offers a U Value of 2.48W/m² K. 

LEXAN™ THERMOCLEAR™ meets ASTM E84 Class A ( or ASTM E84-08 ), NFPA No 255 (National Fire Protection Association ANSI/NFPA No 101 ) and UL723


U-Value is a Measurement of Heat Transfer. It is Expressed in W/m² Kelvin.
It Calculates the Amount of Heat Transfer in Watts (W) per meter square


The Lower the U Value, The Lesser the Heat Transfer Through the Multi-Wall Sheet, known as Heat Insulation/ Lesser Heat


The Natural Green LEXAN™ THERMOCLEAR™ SCIR 10 mm allows Approximately 48% Light Transmission
It Features a Unique Technology of 2 Side Proprietary Surface UV Resistance Coating, Developed to Protect the Sheet against the Degrading Effects of Ultra-Violet Radiation & Acid Rain in Outdoor Weather.


The 2 Side Coating Help Ensure Long-Term High Light Transmission against Outdoor Weathering and Minimize Installation Mistake Costs.


LEXAN™ THERMOCLEAR™ SCIR offers Diffuser Visual Effect & Hides those Annoying Dust or Dirt while allowing Natural Daylight to Pass-Through. It also offers High Stiffness & Flat when Installed. Please refer to the Technical Guide for Wind Load Calculation

This Multi-Wall Sheet also Reduces Glare from the Sun Light & Does Not Produce Magnifying Glass Effect from Clear Glass or Solid Polycarbonate Sheet

Standard Color Available, SCIR Natural Green: GN8B038T. Stocks Available in Malaysia
Custom Color, High MOQ for Project Basis: SCIR Dark Green, SCIR Grey & SCIR Blue

Lexan Thermoclear 10 mm 5 Wall Polycarbonate Sheet for Awning

Suggested Structural Installation for LEXAN Thermoclear 10 mm 5 Walls

The Calculation Applied to Maximum Building Height Up to 8 meters ( 26.25 feet)
Wind Loading based on 600 N/m², Maximum Strong Wind & Near Storm Level

Size of Metal Structure, Supporting 4 Side

= 1200 mm width x 1800 mm length.

The Above is the Maximum Size & No Sagging / Wavy Appearance
The 10 mm 5 Wall Polycarbonate Sheet Remain Flat

If The Structural Size goes Beyond the Recommended Size, The Multi-Wall Polycarbonate Sheet Will Sag & Wind Loading will Fail

Important Accessories

a) Advanced Anti Dust Tape:
- to Allow Condensation Water to Flow Out
- Prevent Dust or Insects from Entering the MWS
- thus No Algae or Moss will Grow
b) Custom Design Anti Dust Tape Capping to Protect & Prolong the Life of Anti Dust Tape. Available in Malaysia
- PSP10 Profile ( for 10 mm MWS )
- PSP16 Profile ( for 16 mm MWS )
c) Weatherable Tape, to Prevent Water Sipping into the Anti Dust Tape Capping
d) Custom Design PSP501 Clamping. Width Designed for Good Clamping
e) Custom Design PSP502 / 504 Cover Clamping.
- Cover of Assembly Screws for Aesthetic
- Reduce Water Sipping through Screw Holes
f) Custom Design PSP503 Rubber Profile. Long-Lasting Rubber for Clamping MWS
g) Custom Design PSP10 Clamping Cover, Aesthetic & Stop Insect Entering the PSP-501 Clamping

LEXAN™ THERMOCLEAR™ Sheet passed B-s1,d0 against EN-13501-1


LEXAN™ SCIR- IR Blocking Material Technology to Reduce Heat Build Up

bottom of page