KP Awning Trading (M) Sdn Bhd
Awning & Skylights Specialist with more than 41 Years Serving Perak
LEXAN™ THERMOCLEAR™ PLUS 16 mm 9X Wall Bronze Polycarbonate. Low U Value
Coated UV Resistant & Reduced Heat. Lightweight@2.50 kg/m² Multi-Wall Sheet
LEXAN™ THERMOCLEAR™ PLUS 16 mm is a 9X Wall Polycarbonate Multi-Wall Sheet.
​
It is Lightweight at only 2.50 kg/m². Meets ASTM E84 Class A
​
The Advanced LEXAN™ THERMOCLEAR™ PLUS LT2UV169X 9X Wall offers U Value of 1.77 W/m² K.
U-Value is a Measurement of Heat Transfer. It is Expressed in W/m² Kelvin.
It Calculates the Amount of Heat Transfer in Watts (W) per meter Square
The Lower the U Value, The Lesser the Heat Transfer Through the Multi-Wall Sheet known as Heat Insulation/ Lesser Heat
A Clear LEXAN™ THERMOCLEAR™ PLUS 16 mm allow 54% Light Transmission
It Features an Advanced 2 side Proprietary Surface Coating Designed to Protect the Sheet against the Degrading Effects of Ultra-Violet Radiation & Acid Rain in Outdoor Weather.
The 2 Side Coating Help Ensure Long-Term High Light Transmission against Outdoor Weathering and Minimize Installation Mistake Costs.
LEXAN™ THERMOCLEAR™ PLUS offers Diffuser Visual Effect while allowing those Annoying Dust or Dirt to be hided.
Natural Daylight to Pass-Through. It also offers High Stiffness & Flat when Installed. Please refer to the Technical Guide for Wind Load Calculation
This Multi-Wall Sheet also Reduces Glare from the Sun Light & Does Not Produce Magnifying Glass Effect from Clear Glass or Solid Polycarbonate Sheet
As a Barrier, LEXAN™ THERMOCLEAR™ PLUS 16 mm will Result in an 18 dB Sound Reduction
LEXAN™ THERMOCLEAR™ PLUS 16 mm 9X Wall available in Perak in Color Bronze - 515055
Suggested Structural Installation for LEXAN Thermoclear 16 mm 9X Walls
The Calculation Applied to Maximum Building Height Up to 8 meters ( 26.25 feet)
Wind Loading based on 600 N/m², Maximum Strong Wind & Near Storm Level
Size of Metal Structure, Supporting 4 Side
= 1390 mm width x 2085 mm length.
The Above is the Maximum Size & No Sagging / Wavy Appearance
The 16 mm 9X Wall Polycarbonate Sheet Remain Flat
If The Structural Size goes Beyond the Recommended Size, The Multi-Wall Polycarbonate Sheet Will Sag & Wind Loading will Fail
Important Accessories
a) Advanced Anti Dust Tape:
-
to Allow Condensation Water to Flow Out
-
Prevent Dust or Insects from Entering the MWS
-
thus No Algae or Moss will Grow
b) Custom Design Anti Dust Tape Capping to Protect & Prolong the Life of Anti Dust Tape. Available in Malaysia
-
PSP10 ( for 10 mm MWS )
-
PSP16 ( for 16 mm MWS )
c) Weatherable Tape, to Prevent Water Sipping into the Anti Dust Tape Capping
d) Custom Design PSP501 Clamping. Width Designed for Good Clamping
e) Custom Design PSP502 / 504 Cover Clamping.
-
Cover of Assembly Screws for Aesthetic
-
Reduce Water Sipping through Screw Holes
f) Custom Design PSP503 Rubber Profile. Long-Lasting Rubber for Clamping MWS
g) Custom Design PSP10 Clamping Cover, Aesthetic & Stop Insect Entering the PSP-501 Clamping
LEXAN™ THERMOCLEAR™ Sheet passed B-s1,d0 against EN-13501-1